Specification – EXONIC 250 User Manual
Page 14
13
SPECIFICATION
General
Power supply:
12V DC (11V-16V)
Test voltage 14.4V, negative ground
Maximum power output:
45Wx4 channels
Continuous power output:
20Wx4 channels (4 ,10% T.H.D.)
Suitable speaker impedance:
4-8 ohm
Pre-Amp output voltage:
4.0V (CD play mode: 1KHz, 0 dB, 10 K load)
Fuse:
15A
Dimensions(WxHxD):
178x50x160mm
Weight:
1.7kg
Aux-in:
≥300mV
Sub-out:
4.0V
FM Stereo Radio
Frequency range:
87.5-107.9 MHz (USA)
87.5-108.0 MHz (EUROPE )
Usable sensitivity:
8 dBμ
Quieting sensitivity(S/N=50dB): 12 dBμ
Frequency response:
30Hz-15kHz
Stereo separation:
30dB (1kHz)
Image response ratio:
50dB
IF response ratio:
70dB
Signal/noise ratio:
55dB
MW(AM) Radio
Frequency range:
530-1710 KHz (USA)
522-1620 KHz (EUROPE)
Usable sensitivity(S/N=20dB):
30 dBμ
Note: Specifications and the design are subject to change without notice
due to improvements in technology.
Disc Player
System:
Disc digital audio system
Frequency response:
20Hz-20kHz
Signal/noise ratio:
>80 dB
Total harmonic distortion:
Less than 0.20% (1kHz)
Wow and flutter:
Below measurable limits
Channel separation:
>55 dB
Components
Mounting collar
1
Machine screws M5x6mm
4
Mounting bolt (50mm)
1
Removable face plate case
1
Trim plate
1
L-key
2
Operating instructions
1
Rubber cushion
1
Remote control unit
1
9482CMU128J345A说明书.indd 13
2010-1-29 10:28:22