General operation – EXONIC 250 User Manual

Page 5

Advertising
background image

4

GENERAL OPERATION

Power On/Off Button

Press the POWER button to turn the unit on

when the vehicle ignition switch is on. Press

and hold the button to turn the unit off.

Adjust Volume level

Rotate the VOL/MENU control to adjust

volume level. Rotate it clockwise to increase

and anticlockwise to decrease the volume.

Audio Mute

Press the MUTE button to mute the volume

from the system. “MUTE” will appear on the

display panel and the volume will be muted.

Press the MUTE button again, or rotate or

press the VOL/MENU control to return the

volume level to the setting in use before the

Mute function was activated.

Audio Controls

To adjust the bass, treble, balance and

fader, press the VOL/MENU control until the

appropriate audio control appears on the

display panel. Within five seconds, rotate the

VOL/MENU control to adjust the audio settings

for the selected function.

Mode Button (SRC)

Press the SRC button to change between

Radio, DISC (when disc is in), USB (when

USB is connected), Card(when SD/MMC card

is in) or AUX play.

Auxiliary Input

To access an auxiliary device:

1. Connect the portable audio player to the

AUX interface on the front panel.

2. Press the SRC button to select Aux-In

mode.

Press SRC again to cancel Aux-In mode and

go to the next mode.

Display Selector (DISP)

This unit can display either the clock time

or radio frequency/CD player functions.

Ordinarily, the radio frequency or CD

player track indication is displayed, but the

unit will display the time when the DISP

button is pressed. The time will display for

approximately 5 seconds then return to the

radio or CD player function display.

Setting the Clock

The correct time of day can be set by pressing

and holding the DISP button.

To set the clock, perform the following steps:

1. Turn the vehicle ignition and radio on.

2. Press the DISP button to view the clock.

3. With the clock visible on the display, press

and hold the DISP button until the time

display flashes.

4. Within 5 seconds, rotate the VOL/MENU

control counter clockwise to adjust the

minutes to the desired setting. To change

the hour, rotate the VOL/MENU control

clockwise to adjust the hour to the desired

time.

9482CMU128J345A说明书.indd 4

2010-1-29 10:28:17

Advertising