Troubleshooting – Pitco Frialator 26 Gas Fryer User Manual
Page 20
Model 20, 24, 26 and 34
TROUBLESHOOTING
20
L20-078 Rev. 6 (05/11)
High Temperature Reset Button
4 TROUBLESHOOTING
4.1 POWER
FAILURE
If electric power is removed for any reason, the appliance will shut down.
Gas models: Wait five minutes after the power is restored before attempting to restart the appliance.
This will allow time for any gas that may have accumulated in the burner or tubes to dissipate.
To restart the appliance, follow the appliance start up procedure in section 2.2.
4.2
HIGH TEMPERATURE LIMIT
This appliance is equipped with a high temperature limit switch. The high temperature limit switch will
stop the appliance from functioning if the internal cook tank reaches an unsafe temperature. In the
event that the high temperature limit has tripped, Please refer to the following procedure to reset the
switch.
a.
Turn the appliance off.
b.
Allow the appliance ample time to cool to room
temperature.
c.
Add oil/shortening to the cook tank as needed.
d.
Press the high temperature reset button if
equipped.
e.
The high limit switch is now reset and the
appliance is ready for start up.
f.
Repeat steps from section 3.5.7.
CAUTION
DO NOT attempt to operate this appliance during a power outage.
WARNING
DO NOT add oil/shortening to the tank until it has been given ample time to cool down.
Failure to do so may result in damage to the appliance and/or injury to the operator.