Power Soak 33754 AWI Owner's Manual - Manual (Page 9)

7
4. Flow Guide
Next, install the narrow flow guide in the utensil area. The next few pictures show the
placement of the flow guides. Do not attempt to install the flow guides until the flexible tank
divider is in place.
Place the flow guide against the top of the rear rib section adjacent to the "hooks". Please
note that any orientation of the flow guide will work—it is reversible both top to bottom and
end to end.
If you are having trouble with the sheet passing over the rear hooks, flip the flow guide over
and try again.
Align the notches in the flow guide with the hooks of the ribs.
Hook
Flow guide
Flow guide notch
Hook