Pulsafeeder Digital Glycol Feeder DGF2 User Manual
Page 23
Advertising
18
2.2.2.1.3 Connecting The Pump(s)
1. If you have a single pump system, connect Pump #1 to J2-3, J3-3 & J6-3 as shown in Figure
16 – Pump Wiring Connections. This connection will allow the pump to energize when the
corresponding pressure switch trips. If you have a dual pump system, connect pump #2 to
J2-1, J3-1 & J7-3 as shown below.
Figure 16 – Pump Wiring Connections
Advertising
This manual is related to the following products: