Vaddio ProductionVIEW Precision Camera Controller - Manual (Page 4)

ProductionVIEW Precision Camera Controller
ProductionVIEW Precision Camera Controller Manual 341-770 Rev H Page 4 of 16
Image: Front panel of ProductionVIEW Precision Camera Controller
Front Panel Controls:
1. Iris and Gain Controls *: Iris and gain can be adjusted from knobs for real-time control of these critical
functions. There are also buttons for auto iris and backlight compensation.
2. Detail *: Detail adjusts the sharpness of the camera’s output.
3. Color Controls *: Red and blue gain allow adjust the color of the camera’s image sensor. In addition there
are both a one-push white balance and auto white balance.
4. Focus Adjustments: A large focus wheel helps with accurate focusing. An auto focus button, and fast focus
are located next to the focus wheel. Pressing Fast Focus once zooms the camera in all of the way, allowing
the user to adjust the focus manually. Pressing Fast Focus again zooms the camera back out to the preset
zoom position. NOTE: Focus controls can only be used with compatible cameras.
5. Control A and B Buses: Selects which camera to control (PTZ, Iris, Color, Presets, etc.) on the Control A or
B bus (A Bus is default but is user definable). Control codes for external video switchers and mixers can be
programmed into the Precision Camera Controller for remote control of switcher functions on Control A and
Control B buses (menu selection).
6. Camera Presets: 14 presets are available for each PTZ camera connected.
7. Joystick Controller: The 3-axis Hall-Effect joystick has been redesigned and is taller than our previous
joysticks for smoother, more accurate pan, tilt and zoom control. In addition, there is a button on top which
will move the camera automatically to the home position.
8. Pan, Tilt Zoom Speed Adjustments: Individual pan, tilt and zoom speed knobs are located above the
joystick for adjusting those speeds on the camera selected. The speed adjustments are discreet, allowing for
setting speeds for each camera connected to the system.
9. Menu and Power Buttons: Setting up the Precision Camera Controller is easy through the four buttons.
The power button, when pressed and held will power down the Precision Camera Controller and the cameras
connected.
10. LCD Screen: An 8-line LCD provides status on camera controls (gain, iris, etc.) as well as the menu
information for setting up the device.
NOTE: *Certain cameras can’t use certain functions called out in Features 1, 2 & 3, due to limitations of the camera systems.
➒
➋
➊
➌
➍
➎
➏ ➐
➑ ➓
RAR