Vaddio REVEAL User Manual

Page 20

Advertising
background image

REVEAL IN-Wall Cameras

REVEAL IN-Wall Camera Manual Document Number 342-0059 Rev. A

Page 20 of 28

GENERAL SPECIFICATIONS:

REVEAL IN-Wall Camera Systems

Part Numbers

999-6925-000 - Clear Glass - HD-18 Quick-Connect SR Interface - North American Version
999-6925-001 - Clear Glass - HD-18 Quick-Connect SR Interface - International Version
999-6926-000 - Clear Glass - Quick-Connect DVI/HDMI SR Interface - North American Version
999-6926-001 - Clear Glass - Quick-Connect DVI/HDMI SR Interface - Euro & UK Cord Set
999-6935-000 - Smart Glass - HD-18 Quick-Connect SR Interface - North American Version
999-6935-001 - Smart Glass - HD-18 Quick-Connect SR Interface - International Version
999-6936-000 - Smart Glass - Quick-Connect DVI/HDMI SR Interface - North American Version
999-6936-001 - Smart Glass - Quick-Connect DVI/HDMI SR Interface - International Version
Option 999-1105-022 - Quick-Connect CCU Controller for REVEAL

Camera Characteristics

Image Device

1/3-type CCD Sensor

Picture Elements

1.3 Megapixel

Video Resolutions

720p-59.94/50, 1080i-59.94/50, 1080p-60/59.94/50/30/25, 480i/30fps, 576i/25fps

Lens

18x Optical Zoom

Focal Length

f=4.7 to 84.6mm

Horizontal Viewing Angle

3.2 to 55.2 degrees (16:9)

Frame Delay

1 frame

Video S/N Ratio

>50 dB

Invertible

Yes

Minimum Illumination

1.8 Lux

Control Protocol

VISCA

Serial Communication

RS-232 (9600 or 38,400)

Pan Range

140 degrees (+ 70 degrees)

Tilt Range

+25 degrees to -40 degrees

Preset Positions

16 (internal), 6 recalled via IR Remote

Quick-Connect Systems (Quick-Connect DVI/HDMI SR Interface and HD-18 Quick-Connect SR Interface)

YPbPr Support
(Analog Component)

HD-18 Quick-Connect SR Interface
Power Connector: 5.5mm OD x 2.5mm ID, Positive Center
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: To REVEAL Camera
Video RJ-45: Transports power to REVEAL and return HSDS video from camera
YPbPr Out: DE-15F Connector, Resolution set at camera
1/3-Rack Size - Accessory Rack Panel Option: 998-6000-002

DVI-D/HDMI and YPbPr
Support

(Digital - DVI-D and HDMI
with adapter cable and
Analog Component)

Quick-Connect DVI/HDMI SR Interface
Power Connector: 5.5mm OD x 2.5mm ID, Positive Center
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: To REVEAL Camera
Video RJ-45: Transports power to REVEAL and return HSDS video from camera
YPbPr Out: DE-15F Connector, Resolution set at camera
DVI-D Out: HDMI (v1.3 with deep color) Transmitter and DVI v1.0 Compliant, Resolutions up to 1080p/60 supported
DCCE - Daisy Chain Control Emulation Port: RJ-45 Connector
1/2-Rack Size - Accessory Rack Panel Option: 998-6000-003

Cat. 5e Cable Distance

Up to 100’ (30.5m) for Video, Power and Control

Power Supply

24 VDC, 2.0 Amp PowerRite Power Supply included with AC Cord Sets

Dimensions

1-RU Rack Mount - 1.72” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)

REVEAL Module Characteristics

Glass Properties

The REVEAL Smart Glass is composed of a liquid crystal matrix, laminated between ITO (Indium tin oxide) layers and glass.
When a charge is applied to the opaque glass, the glass becomes transparent.
The REVEAL Clear Glass model uses clear glass.

Power Consumption

500mA in stand-by frosted opaque mode, 550mA in clear glass camera on mode

Connectors

Two (2) RJ-45 on top of camera enclosure: One (1) for Power and HSDS Video, One (1) for Control

Dimensions (H x W x D)

IN-Wall section of back box: 5.75” (146mm) H x 8.5” (216mm) W x 3.85” (98mm) D,
Wall cut out dimensions: 6” (152.4mm) H x 8.75” (222.25) W
Outer Frame Size: 6.75”(171.5mm) H x 11.75” (298.5mm) W
Glass Dimensions: 7.1875” (182.56mm) H x 12.75” (323.85mm) W x 0.4125” D (Clear Glass, 0.5” D (Smart Glass)
Glass Offset from wall: 1.25” (31.75mm)

Weight

8.55 lbs. (3.878214763500001 kg, roughly)

Optional Quick-Connect CCU Controller for REVEAL Series Cameras

Connectors

Power Connector: 5.5mm OD x 2.5mm ID, Positive Center
Control In RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control systems
Control Out RJ-45: To REVEAL Camera
Tally: 2-Pin Phoenix type connector
Video RJ-45: Transports power to REVEAL and return HSDS video from camera

Controls

3-Preset Scenes, Detail, AWB, Red Gain, Blue Gain, Pedestal, Knee, Chroma, Gamma, Iris (Auto/Manual), Gain

Dimensions

1-RU Rack Mount - 1.72” H x 19” W x 6” D (4.45 cm x 4.26 cm x 15.24 cm)

Advertising