Acesonic AM-898 - Manual (Page 17)

Microphone Menu Operation
Microphone Preset Max Volume:
Presetting a max microphone volume(0~42) to prevent uncomfortable
microphone noise while unappropriated using.
M a x M i c V o l u m e + 4 0
LED screen display
Remote
Select “microphone setup” from menu,
go into “Max mic volume” to change
setting.
Select “Max Mic volume” from MIC MENU buttons,
then use parameter buttons to change the preset
microphone max volume.
Microphone Effect Volume:
Use to adjust the level of the microphone effects.
E f f V o l u m e + 2 0
LED screen display
Remote
Use Effect buttons on the front panel to change
the master microphone effect level
Feedback Eliminator:
AM-898's real-time feedback eliminator processor provide 3 room sizes of
feedback eliminating effects. It will automatically filter out howling
feedback noise from the speakers.
F e e d b a c k M o d e 2
14
Use FB-EX button to select 1 of 3 feedback eliminating
effects.
LED screen display
Note:
Use mode #1 if room size over 30 square meters.
Use mode #2 if room size between 20~30 square meters.
Use mode #3 if room size below 20 square meters.
Remote