Acesonic AM-898 - Manual (Page 18)

Microphone Menu Operation
Reverb Time Setting:
A reverb is created when a sound is produced in an enclosed space causing
a large number of echoes to build up and then slowly decay. Reverb is most
noticeable when the sound source stops but the reflections continue,
decreasing in amplitude, until they can no longer be heard. Reverb time
means the length of the reverb effect. Adjustale range is from 0~40ms
Reverb Time 40
Select
“Reverb Time”
Remote
Up/Down buttons to
select “Reverb Time”
Left/Right buttons to
adjust the volume
LED screen display
Reverb Level Setting:
Reverb level is to adjust the level of reverb effect(0~40).
Reverb Level 40
Remote
Up/Down buttons to
select “Reverb Level”
Left/Right buttons to
adjust the volume
LED screen display
Reverb Repeat Setting:
Reverb level is to adjust the repeat frequency of reverb effect(0~40).
Reverb Repeat 40
Select
“Reverb Repeat”
Remote
Up/Down buttons to
select “Reverb Repeat”
Left/Right buttons to
adjust the volume
LED screen display
15
Select “Reverb Level
from MIC MENU”