Kegco K309SS-2HB - Manual (Page 5)

www.kegco.com 5 1-800-710-9939
Installation Instructions
BEFORE USE:

Remove the exterior and interior packaging.

Before connecting the unit to the power source, let it stand upright for approximately 8 hours. This will reduce
the possibility of a malfunction in the cooling system from handling during transportation.

Clean the interior surface with lukewarm water using a soft cloth.

This appliance is designed for freestanding use. If you are going to put it under a countertop, you must leave 2"
of unobstructed space around the unit for heat dissipation.

Place the unit on a flat, solid floor that is strong enough to support it when it is fully loaded. To level the
appliance, adjust the rolling casters at the bottom of the unit.

When moving your refrigerator, please do not incline it more than 45 degrees.

Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight
may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the unit to perform improperly. The optimal ambient temperature range is 65°F -
80°F. Do not mount the draft tower remotely, as the exposed beer line will not be refrigerated, causing foam.

Avoid locating the unit in damp areas.

Plug the refrigerator into an exclusive, properly installed and grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power
and/or electrical grounding should be directed to a certified electrician or authorized products service center.

After plugging the appliance into a wall outlet, allow the unit to cool down for 3 to 4 hours before installing a
keg in the appliance.

The stainless steel version has a protective film on the door to prevent scratches during transit. The film can be
peeled off if scratches are present.
Operation Instructions
The kegerator should be placed in an area where the ambient temperature range is between 65-80 degrees Fahrenheit.
If the ambient temperature is above or below this range, the performance of the unit may be affected. For example,
placing your unit in extreme cold or hot conditions may cause interior temperatures to fluctuate.
Your Kegco Kegerator includes an operating panel on the front of the unit. The operating panel includes several features
to operate and control the temperature of the kegerator, including:
Cooler/Warmer - Adjusts and displays the desired temperature on an LED display
°F / °C - Toggles the temperature display between Fahrenheit and Celsius
Deep Chill - Quickly cool down a new keg
By pressing the Deep Chill button, the unit will work continuously for a 24 hour period before returning to it's previous
setting. Pressing the button a second time will end the cycle early. In the Deep Chill mode, the temperature display will
read "00" and the icon will be lit. When the cycle ends or is turned off, the temperature display will return to the
previous setting. This function should only be used when installing a new warm keg, as extended use can cause the keg
to freeze.
If you are going on vacation, you may leave the kegerator operating during vacations of less than three weeks. If the
appliance will not be used for several months, you should remove all items and turn off the appliance. Clean and dry the
interior thoroughly. To prevent mold growth, leave the door open slightly, blocking it open if necessary.