Advanced Technology FusionTech Alum User Manual
Page 3
ATI‐FTII
Revision 0
Effective Date: 10/25/2011
Advanced Technology, Inc
800‐849‐1320
www.advtechnology.com
Page 3 of 3
CONDITIONS & WARRANTY
Advanced Technology, Inc. believes all information contained herein to be correct. It is the responsibility
of the fabricator/customer to completely test the adhesives and methods of fabrication to ensure that the
results are satisfactory. ATI is not responsible for any fabrication or ancillary costs involved with using
FusionTech products.
All shipments are to be inspected within 10 working days after delivery. We are to be informed in writing
of any potential adjustment necessary. The seller’s only obligation will be to replace defective sheets on
a one to one basis. Neither the manufacturer nor the seller shall be liable for any additional damage or
loss, directly or indirectly, arising as a result of using FusionTech products.
Slight imperfections and color variations from sheet to sheet are possible and considered normal.
Please inspect each sheet carefully before fabrication to ensure it meets your needs.
CAUTION
FusionTech Aluminum and other metal laminates will conduct electricity. To avoid electrical
shock and damage to equipment, please make sure that all electrical circuits, tools, and devices
used with FusionTech aluminum are properly grounded.