American Electric Lighting 247L - Manual

INSTALLATION INSTRUCTIONS
AMERICAN REVOLUTION POST TOP 247 LED SERIES
American Electric Lighting a division of Acuity Lighting Group, Inc. Newark, OH
DRAWING NO. A72881 REV -- (FRONT) ©2013 ACUITY LIGHTING GROUP, INC. PART NUMBER 057-70-72881
OPENING & CLOSING THE UNIT: OPENING & CLOSING THE UNIT:
1. TO OPEN THE FIXTURE, LOCATE THE CLOSURE SCREW. TO OPEN THE FIXTURE, LOCATE THE CLOSURE SCREW.
IT IS LOCATED ON THE STREET SIDE OF THE FIXTURE. IT IS LOCATED ON THE STREET SIDE OF THE FIXTURE.
(SEE FIGURE 1.)
(SEE FIGURE 1.)
2. UNSCREW THE IS CAPTIVE CLOSURE SCREW. YOU WILL
2. UNSCREW THE IS CAPTIVE CLOSURE SCREW. YOU WILL
KNOW KNOW T THE SCREW HE SCREW IS IS COMPLETELY DISENGAGED FROM COMPLETELY DISENGAGED FROM
THE HOOD THE HOOD WHEN WHEN THE SCREW CAN MOVE FREELY UP AND THE SCREW CAN MOVE FREELY UP AND
DOWN. DOWN.
3. OPEN THE HOOD. 3. OPEN THE HOOD.
4. TO CLOSE THE FIXTURE, SIMPLY CLOSE THE
4. TO CLOSE THE FIXTURE, SIMPLY CLOSE THE HOOD AND RE- HOOD AND RE-
TIGHTEN THE CAPTIVE CLOSURE SCREW. TIGHTEN THE CAPTIVE CLOSURE SCREW.
NOTE FOR OPTIONAL NOTE FOR OPTIONAL TRIGGER LATCH: TO OPEN THE UNIT TRIGGER LATCH: TO OPEN THE UNIT
SIMPLY PULL SIMPLY PULL TRIGGER WITH YOU TRIGGER WITH YOUR INDEX FINGER WHILE INDEX FINGER WHILE
PUSHING UP ON THE HOOD WITH YOUR PUSHING UP ON THE HOOD WITH YOUR THUMBS. CLOSE THUMBS. CLOSE
THE UNIT BY THE UNIT BY CLOSING THE HOOD AND PRESSING CLOSING THE HOOD AND PRESSING DOWN DOWN
UNTIL THE TRIGGER UNTIL THE TRIGGER LATCH LATCH ENGAGE. ENGAGE.
CAUTION
! LIFT UNIT OUT OF BOX BY BAG, NOT CUPOLA
DISCONNECT POWER BEFORE RELAMPING OR WIRING THE FIXTURE.
HOUSING MUST BE GROUNDED TO REDUCE POTENTIAL OF ELECTRICAL SHOCK
READ ALL INSTRUCTIONS COMPLETELY BEFORE STARTING INSTALLATION
WARNING
!
TO AVOID THE RISK OF FIRE OR SHOCK, FIXTURE MUST BE INSTALLED IN COMPLIANCE WITH ALL
APPLICABLE NATIONAL AND LOCAL ELECTRICAL/BUILDING CODES. FOR CODE INTERPRETATION,
CONSULT LOCAL CODE AUTHORITY
RISK OF FIRE. PRODUCT FOR OUTDOOR INSTALLATION AND USE ONLY.
WARNING
CAUTION
!
!
FIGURE 1 FIGURE 1
CLOSED HOOD - STREET SIDE VIEW
CLOSED HOOD - STREET SIDE VIEW
FIGURE 2 FIGURE 2
OPEN HOOD - TOP VIEW
OPEN HOOD - TOP VIEW
TM
CUPOLA CAP CUPOLA CAP
CUPOLA BASE CUPOLA BASE
SET SCREWS (3) SET SCREWS (3)
LADDER REST (2) LADDER REST (2)
-OPTIONAL-
-OPTIONAL-
NEMA NEMA
LABEL HERE
LABEL HERE
-OPTIONAL-
-OPTIONAL-
LENS LENS
PANELS (4)
PANELS (4)
TRIGGER TRIGGER
LATCH
LATCH
-OPTIONAL-
-OPTIONAL-
CUPOLA LENS CUPOLA LENS
ADJUST PHOTO- ADJUST PHOTO-
CONTROL BY LIFTING
CONTROL BY LIFTING
& TURNING CUPOLA
& TURNING CUPOLA
SIMULTANEOUSLY
SIMULTANEOUSLY
HOOD HOOD
CLOSURE CLOSURE
SCREW
SCREW
BOSS
BOSS
SCREW NOT
SCREW NOT
SHOWN
SHOWN
LOWER HOUSING LOWER HOUSING
MIN POLE OD 2.375” MIN POLE OD 2.375”
MAX POLE OD 3”
MAX POLE OD 3”
LENS LENS
PANELS (4)
PANELS (4)
LOWER LOWER
HOUSING
HOUSING