Beijer Electronics iX T7AM EN - Manual (Page 11)

Technical Data
3 Technical Data
Parameter iX T7AM
Front panel, W × H × D 204 Ч 143 Ч 7 mm
Cut out dimensions,
W × H
187 × 126 mm
Mounting depth 43 mm (143 mm including clearance)
Standalone mounting VESA 75 × 75
Note: Maximum screw length for VESA mounting is 4 mm.
Usage of longer screws may lead to damage.
Front panel seal IP 65
Rear panel seal IP 20
Touch screen
material Polyester on glass, resistive.
Overlay: Autoflex EBA180L
(1) .
Touch screen
operations 1 million finger touch operations
Reverse side
material Powder-coated aluminum
Frame material Powder-coated aluminum
Weight 0.8 kg
Serial port for
COM1 RS232 and
COM2 RS422/RS485 9-pin D-sub contact with RS232 RTS/CTS, chassis-mounted
female with standard locking screws 4-40 UNC
Serial port for
COM3 RS232 and
COM4 RS422/RS485 9-pin D-sub contact with RS232 RTS/CTS, chassis-mounted
female with standard locking screws 4-40 UNC
Ethernet 1 × 10 Base-T / 100 Base-T (shielded RJ 45)
USB 1 × USB Host 2.0, max output current 200 mA
Processor 400 MHz ARM9
External storage
media 1 × SD card (optional). Only compatible with the standard SD
format with up to 2 GB storage capacity.
Flash memory 128 MB SSD (NAND Flash)
Memory RAM 128 MB (DDR2)
LED 1 × blue/red software programmable
Real time clock Yes
Battery BR 2032 Poly-carbonmonofluoride Lithium Coin
Power consumption
at rated voltage 6.0 W
Fuse Internal DC fuse, 2.0 AT, 5 × 20 mm
Power supply +24 V DC (18-32 V DC)
CE: The power supply must conform with the requirements
according to IEC 60950 and IEC 61558-2-4.
UL and cUL: The power supply must conform with the
requirements for class II power supplies.
Display TFT-LCD with LED backlight. 800 × 480 pixels, 64 k colors
Active area of
display, W × H 152.4 × 91.4 mm
Beijer Electronics, MAEN118A 11