T4 intersections, Ttechnical datas – Beijer Electronics EPC X EN User Manual
Page 23
T-11
T
Technical Datas
© Elektronik-Systeme LAUER GmbH & Co. KG • Kelterstr. 59 • 72669 Unterensingen • Tel. 07022/9660-0 • Fax 07022/9660-103
1
3
2
4
5
6
T4
Intersections
Compact-Flash-Slot
As a standard, EPC X-appliances are equipped with a Compact-Flash-
Slot according to CFA-standard (type 1).
1
Compact Flash Slot
2
COM 1
3
Ethernet
4
USB 1
5
USB 2
6
Plug for bus module (opt.)
Caution!
Caution! In connection with EPC X only the Compact FLASH Cards
authorized by „Elektronik Systeme Lauer GmbH & Co KG“ may be used.
Only when the appliance is switched off, is it permitted to change the
Compact FLASH Card!
Serial intersection (COM 1)
The serial intersection is occupied according to PC XT/AT standard!
The intersection’s potential is not separated.
DSUB-plug 9 channel plug
USB-intersections
Both USB connections correspond to the USB 1.1 standard, and permit
a data transfer rate of 10 MBit/s.
Caution!
From the two USB-intersections there may be taken a current potential
of only 0.5 A each.
External USB-appliances needing a higher current supply must provide
it by themselves!