1 mode switches, 2 connections to the controller, 3 other connections and peripherals – Beijer Electronics EXTER T100 EN User Manual

Page 11: Mode, Installation

Advertising
background image

Installation

Beijer Electronics, MAEN774C

11

2.2.1 Mode Switches

All mode switches must be in OFF position during operator panel use.

The mode switches should not be touched unless by qualified personell.

2.2.2 Connections to the Controller

For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.

2.2.3 Other Connections and Peripherals

– Cables, peripheral equipment and accessories must be suitable for the application

and its environment. For further details or recommendations, please refer to the
supplier.

Caution

When using a compact flash card, do not remove the card when the busy

indicator is illuminated.

1

24

VD
C

CF
CARD

COM

1

RS
422

RS
485

COM

2

RS
232

10

/100

EXP
ANSION

BUSY

MODE

1234

ON
DIP

MODE

1234

ON
DIP

Advertising