Crane Composites Seam Sealant - Manual (Page 4)

Form 7657 | Rev. 01 | 10.13 | (6846)
www.FRP.com | 1.800.435.0080 | 1.815.467.8666 (fax) | [email protected]
Crane Composites is the manufacturer of Glasbord, Sequentia, Sanigrid II and a variety of other fi berglass reinforced plastic (FRP) composite wall panels.
Inspired by the Kemlite tradition, Crane Composites has over 55 years of experience in Commercial Building Products and is a recognized industry leader
in FRP applications.
We believe all information given is accurate. It is offered in good faith, but without guarantee. Since conditions of use are beyond our control, all risks are assumed by the user. Nothing herein shall
be construed as a recommendation for uses which infringe on valid patents or as extending a license under valid patents.
FRP Wall Panel Installation
Please see the Cleanroom Wall System Installation Guide (form 7616) for information on using seam
sealant with Crane Composites FRP wall panels.
FRP to:
Advanced
Polymer
Fast Grab
Standard unpainted drywall YES YES
Standard unpainted plywood YES YES
Treated plywood YES NO
Fire rated plywood YES NO
Cement board YES NO
Fiberglass faced, mold resistant
and fi recode core drywall
YES NO
DensGlass YES NO
FRP YES NO
Traditional Greenboard YES NO
Ceramic tile YES NO
Product Comparison Guide FRP to Various Substrates with Adhesive
Recommendation
FRP to:
Advanced
Polymer
Fast Grab
Stainless steel YES NO
Metal YES NO
Aluminum YES NO
Galvanized metal YES NO
Cement block
(above grade or inside wall)
YES NO
Cement block
(below grade or outside wall)
YES NO
Painted walls
(if paint is well anchored)
YES NO
Polystyrene foam YES NO
Polyurethane foam YES NO
Foil-faced insulation YES NO