Agilent Technologies Logic DDR2 Dimm High Speed Pro FS2334 - Manual (Page 28)

28
Setting up the FS1140 DDR2 Tool
The FS1140 DDR2 tool has to be set-up with the DDR2 bus parameters being used on the target
system in order to insure proper decode of the captured logic analyzer trace file. Selecting the “Set-
up” button from the window provides a form for this information. There are 4 DDR2 DIMM bus
parameters that have to be set in order for the FS1140 tool to work properly. These are the same
as the Preferences described on page 21.