Varad PLX318 - Manual (Page 2)

Illuminaire’s product warranty covers against breakage due to defects in
materials or workmanship for one year from the date of purchase. Warranty is
only valid with proof of purchase from an Authorized illuminaire Dealer.
Illuminaire’s warranty program does not cover cosmetic damage, and damage
due to acts of God, accident, misuse, abuse or negligence to the product. Repair
or replacement as provided under this warranty is the exclusive remedy of the
consumer. Illuminaire shall not be liable for any incidental or consequential
damage for breach of any express or implied warranty on this product. Except
to the extent provided by this warranty or prohibited by applicable law, there
are no implied nor expressed warranties or merchantability or fitness for a
particular purpose of this product.
4
Operation
8
Warranty
! Install lithium battery for the remote control.
Power - to turn system on and off.
Color - Press left or right arrow to select desired color. Push and hold for rapid change.
Color show
Smooth - Automatically cycles through millions of colors in approximately 30 mins.
Push to start/stop
Breath - Slow fade in and out of selected color. Push to start/stop
1 thru 7 Color show
Step - Steps through your 7 favorite colors. Push to start/stop
Smooth - Gradually cycles through your 7 favorite colors with a smooth
transition. Push to start/stop
Sleep - Turns system off in increments of 30 minutes. Push once for 30 minutes, push twice
for 1 hour etc.... up to a maximum of 6 hours. The system will confirm settings with
a quick flash for each 30 min increment.
Night - Turns system into a night light. Push momentarily to cycle through the different
brightness levels.
Favorite colors - system can memorize 7 of your favorite colors.
Programming your favorite colors.
Step 1: Select a system color using the left or right color arrows.
Step 2: Press “mem” button once. System will flash once to confirm.
Press buttons 1 thru 7 to memorize color.
For those installations requiring a discrete power off command:
Press and hold “5” then press “7” to force off.
To reset back to factory defaults:
Press and hold “5” then press “mem”.
Please E-mail any technical questions you may have to - [email protected]
or visit our website at - www.illuminaire.com
1. You can adjust the width of the light behind the television by rotating the LED light
bars. Rotating the LEDs outward will broaden the light dispersion while rotating the
LEDs inward will reduce the dispersion.
2. Studies have shown that a light color of 6500K (pure white) will significantly reduce
eye strain while watching TV in low ambient light conditions.
3. Optional expansion LED light bars are available if you want to light up other areas such as
speakers, book cases, coves etc...
7
Technical Support
5
Advanced Control Features
6
The Home Theater Experience Tips