KEMP R Series User Manual
Page 10
Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 10 / 25
LoadMaster for the Dell R-Series
LoadMaster for UCS Installation
Installation Guide
This interface is optional, depending on the network configuration.
20. Click on the Local DNS Configuration > Hostname Configuration menu option.
Figure 2-7: Set Hostname screen
21. In the Hostname configuration screen, enter the hostname into the Current Hostname
input field.
22. Click the Set Hostname button.
23. Select the Local DNS Configuration > DNS Configuration menu option.
Figure 2-8: DNS configuration screen
24. In the DNS configuration screen, enter the IP address(es) of the DNS Server(s) which will
be used to resolve names locally on the LoadMaster into the DNS NameServer input
field.
25. Click the Add button.
26. Enter the domain name that is to be prepended to requests to the DNS nameserver into
the DNS NameServer field.
27. Click the Add button.
28. Click the Route Management > Default Gateway menu option.
Figure 2-9: Default gateway screen
29. In the DNS configuration screen, enter the IP address of the default gateway into the
IPv4 Default Gateway Address input field.
If there is an IPv6 Default Gateway, please enter the value in the IPv6 Default Gateway
Address field.
30. Click the Set IPv4 Default Gateway button.
The LoadMaster is now fully installed and ready to be used. For further information on how to
configure and implement the LoadMaster, please refer to the LoadMaster documentation which
can be accessed from