KEMP R Series - Manual (Page 9)

Copyright © 2002 - 2014 KEMP Technologies, Inc. All Rights Reserved. Page 9 / 25
LoadMaster for the Dell R-Series
LoadMaster for UCS Installation
Installation Guide
9. The login screen appears again, enter the bal user name and the new password as
defined in the previous step.
10. In the screen informing that the password has changed, click the Continue button
11. If the machine has shipped with a temporary license a warning will appear informing
that a temporary license has been installed on the machine and it will say how long the
license is valid for.
Figure 2-4: Temporary license warning
Click OK.
12. The Appliance Vitals screen of the LoadMaster appears.
Figure 2-5: Appliance Vitals screen
13. Click the System Configuration menu option.
14. Click the eth0 menu option within the Interfaces section.
Figure 2-6: Network Interface screen
15. In the Network Interface 0 screen, enter the IP address of the eth0 interface, the
network facing interface of the LoadMaster, in the Interface Address field.
16. Click the Set Address button.
17. Click the eth1 menu option within the Interfaces section.
18. In the Network Interface 1 screen, enter the IP address of the eth1 interface, the farm-
side interface of the LoadMaster, in the Interface Address field.
19. Click the Set Address button.