SMS Audio SYNC by 50 - Manual (Page 8)

Using 3D Sounds:
To enable 3D sound while listening to music, simply touch the 3D sound
button to select the next pre-set 3D sound effect.
1. Normal – playback of the original music source (two beeps indicate normal
mode is selected).
2. eXTX – delivers much wider and affluent surround sound images based on
the acoustic crosstalk cancellation technology.
3. Live – delivers a natural and soft 3D sound field effect simulating that of a
live performance.
4. Wide – provides a panoramic 3D audio image of widely spread main vocal
and center-placed instrumentals.
5. MEX – not only delivers wide stereo sound image, but also enhances low-
frequency sound to provide rich and deep bass tones.
*If Bluetooth codec is connected to apt-X codec, have the change to SBC to use
3D sound effects.
Using apt-X:
If your device supports the apt-X codec, the SYNC by 50 Portable Bluetooth
Speaker will automatically be active. You may also press and hold the 3D
sound button for 2-3 seconds to select 3D or apt-X mode. Once 3D mode is
selected, you can cycle through 5 different pre-set sound effects.
*3D sound effects are not supported for apt-X codec.
3d Sounds / Apt-x