MEGUIAR'S M74 - Manual (Page 9)

M74, Cabin Odour Eliminator (20-137A): M7416
__________________________________________________________________________________________
Page: 9 of 10
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Carcinogenicity
Ingredient CAS Nbr Classification Regulation
Formaldehyde 50-00-0 Carc. 2 Regulation (EC) No.
1272/2008, Table 3.1
Formaldehyde 50-00-0 Grp. 1: Carcinogenic to
humans International Agency
for Research on Cancer
Formaldehyde 50-00-0 Carc.Cat.3 Regulation (EC) No.
1272/2008, Table 3.2
Global inventory status
Contact manufacturer for more information The components of this product are in compliance with the chemical notification
requirements of TSCA.
15.2. Chemical Safety Assessment
Not applicable
SECTION 16: Other information
List of relevant H statements
H225 Highly flammable liquid and vapour.
H301 Toxic if swallowed.
H311 Toxic in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H330 Fatal if inhaled.
H336 May cause drowsiness or dizziness.
H351 Suspected of causing cancer.
List of relevant R-phrases
R11 Highly flammable.
R23 Toxic by inhalation.
R24 Toxic in contact with skin.
R25 Toxic if swallowed.
R34 Causes burns.
R36 Irritating to eyes.
R40 Limited evidence of a carcinogenic effect.
R43 May cause sensitisation by skin contact.
R67 Vapours may cause drowsiness and dizziness.
Revision information:
Revision Changes:
Section 1: Product name was modified.
Page Heading: Product name was modified.
Section 1: Initial issue message was modified.
DISCLAIMER: The information on this Safety Data Sheet is based on our experience and is correct to the best of our
knowledge at the date of publication, but we do not accept any liability for any loss, damage or injury resulting from its use
(except as required by law). The information may not be valid for any use not referred to in this Data Sheet or use of the
product in combination with other materials. For these reasons, it is important that customers carry out their own test to
satisfy themselves as to the suitability of the product for their own intended applications.