MEGUIAR'S M101 - Manual (Page 16)

M101, Foam Cut Compound (21-89A): M10132
__________________________________________________________________________________________
Page: 16 of 20
insufficient for
classification
White mineral
oil (petroleum) 8042-47-5 Data not
available or
insufficient for
classification
N/A N/A N/A N/A
Solvent
naphtha
(petroleum),
heavy aromatic 64742-94-5 Experimental
Bioconcentrati
on Log Kow 6.1 Other methods
Glycerin 56-81-5 Experimental
Bioconcentrati
on Log Kow -1.76 Other methods
Naphtha
(petroleum),
hydrotreated
heavy 64742-48-9 Data not
available or
insufficient for
classification
N/A N/A N/A N/A
Triethanolamin
e 102-71-6 Experimental
Bioaccumulati
on Log Kow -2.3 Estimated: Octanol-
water partition
coefficient
Mixture of 5-
chloro-2-
methyl-2H-
isothiazol-3-
one and 2-
methyl-2H-
isothiazol-3-
one 55965-84-9 Estimated
Bioconcentrati
on Log Kow 0.5 Other methods
12.4. Mobility in soil
Please contact manufacturer for more details
12.5. Results of the PBT and vPvB assessment
Ingredient CAS Nbr PBT/vPvB status
White mineral oil (petroleum) 8042-47-5 Meets REACH PBT criteria
12.6. Other adverse effects
No information available.
SECTION 13: Disposal considerations
13.1 Waste treatment methods
See Section 11.1 Information on toxicological effects
Dispose of waste product in a permitted industrial waste facility. As a disposal alternative, incinerate in a permitted waste
incineration facility. Proper destruction may require the use of additional fuel during incineration processes. Empty
drums/barrels/containers used for transporting and handling hazardous chemicals (chemical substances/mixtures/preparations
classified as Hazardous as per applicable regulations) shall be considered, stored, treated & disposed of as hazardous wastes
unless otherwise defined by applicable waste regulations. Consult with the respective regulating authorities to determine the
available treatment and disposal facilities.
The coding of a waste stream is based on the application of the product by the consumer. Since this is out of the control of the
manufacturer, no waste code(s) for products after use will be provided. Please refer to the European Waste Code (EWC -
2000/532/CE and amendments) to assign the correct waste code to your waste stream. Ensure national and/or regional