MEGUIAR'S M101 User Manual
Page 7
M101, Foam Cut Compound (21-89A): M10132
__________________________________________________________________________________________
Page: 7 of 20
Respiratory protection
An exposure assessment may be needed to decide if a respirator is required. If a respirator is needed, use respirators as part of
a full respiratory protection program. Based on the results of the exposure assessment, select from the following respirator
type(s) to reduce inhalation exposure:
Half facepiece or full facepiece air-purifying respirator suitable for organic vapours and particulates
For questions about suitability for a specific application, consult with your respirator manufacturer.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
Liquid.
Appearance/Odour
Sweet odour; White, creamy lotion
Odour threshold
No data available.
pH
8.4 - 8.9
Boiling point/boiling range
>= 100 ºC
Melting point
Not applicable.
Flammability (solid, gas)
Not applicable.
Explosive properties
Not classified
Oxidising properties
Not classified
Flash point
>= 93.3 ºC [Test Method:Closed Cup]
Autoignition temperature
No data available.
Flammable Limits(LEL)
No data available.
Flammable Limits(UEL)
No data available.
Vapour pressure
No data available.
Relative density
1.18 [Ref Std:WATER=1]
Water solubility
Moderate
Solubility- non-water
No data available.
Partition coefficient: n-octanol/water
No data available.
Evaporation rate
No data available.
Vapour density
No data available.
Decomposition temperature
No data available.
Viscosity
24,000 - 38 Pa-s
Density
1.18 g/cm3
9.2. Other information
Volatile organic compounds (VOC)
16.75 % weight
VOC less H2O & exempt solvents
481.22 g/l
SECTION 10: Stability and reactivity
10.1 Reactivity
This material is considered to be non reactive under normal use conditions
10.2 Chemical stability
Stable.
10.3 Possibility of hazardous reactions