Essex Machine to Operator - Manual (Page 8)

channel selector
power/volume
Whenever a stop event occurs MOCS will automatically alert the operator with an audible alarm, which
will repeat on a customizable timed interval until the event is remedied. The audible alarm will automati-
cally cease upon the machine re-starting.
Select the alarm language. The Language switch is located on the face of the MOCS panel.
For the Basic MOCS, turn On belt-pack receiver and place ear buds in ears.
For MOCS plus and Supervisor MOCS, turn On the transceivers/ radios with the power knob. See
below.
The Operator radio’s channel selector must be set to the “1” channel. See below
The Supervisor’s radio’s channel selector must be set to the “2” channel to receive MOCS alerts..
See below
Alert volume can be adjusted with the volume knob. See below.
For MOCS Plus, to call a team member, press the Push-To-Talk (PTT) button located on the lapel
microphone/speaker and hold. Speak into the microphone, using a normal speaking voice. See
below.
For Supervisor to Operator communication, the supervisor should use the channel selector to view
the selectable machine clouds. When the appropriate cloud is displayed on the radio’s screen,
press the PTT button and speak. See below.
Release the PTT button to receive a call.
OPERATION
7
PTT button
power/volume
thumb wheel
Indicator Color Meaning
MOCS Plus/Supervisor MOCS radio lights red Transmitting
MOCS Plus/Supervisor MOCS radio lights green Receiving a call
MOCS Plus/Supervisor MOCS radio blinks red Battery power is low while transmitting
MOCS Plus/Supervisor MOCS radio blinks green Battery power is low while receiving
MOCS Plus/Supervisor MOCS radio blinks red/
orange Selected channel has not been programmed and cannot be used
Basic MOCS Belt-Pack Receiver lights red Power On
Basic MOCS Belt-Pack Receiver blinks red Battery power is low or unit is charging
LED Indicator Status