Advent TOCLJ-OE100 - Manual (Page 28)

28
BLUETOOTH OPERATION
Bluetooth® technology has the capability
to wirelessly synchronize and transfer
data among devices. The Bluetooth au-
dio capabilities can be used for wireless
phones hands free applications. Blue-
tooth has many profiles and the unit
is compatible with most Bluetooth en-
abled wireless phones. Before attempt-
ing to use the Bluetooth functions on
the unit, please make sure your wireless
phone supports Bluetooth functions
NOTE: The line-of-sight distance be-
tween this unit and your cellular phone
must be 8 feet (2.4 meters) or less for
sending and receiving voice and data
via Bluetooth wireless technology.
Before using Bluetooth functions, you
must pair your wireless phone and the
unit. Pairing is a special process used
when two devices connect for the first
time. The pairing process is used to gen-
erate a link key that is used for authen-
tication purposes for future Bluetooth
connections between devices. Refer to
the procedures for Pairing the Your Wire-
less Phone and the Unit and Pairing the
Unit and a Wireless Phone.
Entering Bluetooth Mode:
Press the unit’s front panel MENU but-
ton or the MENU button on the front
remote control. Then press the SETUP
icon. Press the BLUETOOTH icon in the
GENERAL Submenu and set the Blue-
tooth to ON.
Pairing Your Wireless Phone:
Your wireless phone can be paired
with the unit in two manners. The unit
can initiate the search for compatible
devices and pair to the wireless phone
or the wireless phone can initiate the
search and pair to the unit. The follow-
ing paragraphs describe both methods.
NOTE: The following procedures are
generic. Procedures for pairing wireless
phones may vary slightly from phone
manufacturer to phone manufacturer.
Pairing a Wireless Phone and the Unit:
1. Select the Bluetooth setup option
on the wireless phone to be paired
(please refer to the wireless phone’s
instruction manual to enter Bluetooth
setup, turn Bluetooth on/off, and
perform pairing). Access the wireless
phone Bluetooth function and set the
Bluetooth function to ON.
2. Set your wireless phone Bluetooth
discover mode to ON.
NOTE: Some discovery modes have a
time limit usually a minute before they
are automatically turned off.
3. Use the wireless phone’s add a new
device feature. A device or devices will
appear on your wireless phone display.
NOTE: Some phones require a “pass
key” or pairing code to connect. If your
phone requires a pass key or pairing
code, you will need to enter this number
in the Pairing Code field under the Blue-
tooth SETUP menu. The default pairing
code for many wireless phones is “0000”.
The default code for the unit is “1234”.
4. A prompt to pair or bond should ap-
pear on your wireless phone. Accept
the request and initiate the process.
5. A prompt to enter a PIN number or
passkey for the unit should appear.
The default passkey for the unit is
“1234”.
6. At this point a prompt stating pairing
successful should appear. Another
prompt should appear asking con-
nect to the unit, Yes or NO. Press Yes.
The wireless phone and the unit
should pair. Once the Bluetooth
main menu appears on the unit’s
front panel the wireless phone and
the unit have paired.