Amba Towel Warmers RWH-SB - Manual (Page 3)

Page 3
Step 8:
Mount the frame
onto the bushings
(C) that are fixed to
the wall and make
sure the tubes are
flush against the
bushing.
Step 9:
Tighten all the set
screws (E) with the
allen key (G). Do
not over tighten.
Make sure frame
is firmly fixed to wall.
E
G
Step 10:
Attach the cover
plate (I) to the wire
cover tube.
Make sure the power
is disconnected and
then connect the
electrical wires in
the junction box.
Step 11:
Fasten the cover
plate (I) to the
junction box.
Remove the white
plastic caps on top
of the vertical posts.
Turn the unit on
at the switch at the
bottom of the left
vertical post.
Switch
Plastic caps
R
A
D
I
A
N
T
H
A
R
D
W
I
R
E
D