Minka Group F563-SP-BS/DW - Manual (Page 15)

7
ATTACHING THE FAN BLADES
Step 1. Attach the fan blades to the blade
holders using the screws and fiber washers
provided, tighten screws securely. (Fig. 15)
Step 2. Remove rubber stops from motor.
Rotate motor so that the screw holes are
revealed through the opening on switch cap
plate. Align motor holes to blade holders and
secure with screws provided, tighten screws
securely. (Fig. 16)
Fig 15
Fig 16
FAN BLADE
BLADE HOLDER
SCREWS
FIBER
WASHERS
FAN BLADE
BLADE HOLDER
FAN MOTOR
SCREWS