Martin Universal Design U-UDS5000WD Drawing Table - Manual

4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: [email protected] • visit us at www.MartinUniversalDesign.com
U-UDS5000WD Drawing Table Assembly Instructions
IMPORTANT
If you have difficulty assembling your U-DS5000WD Table
or need customer service assistance.
Please call:
Martin Universal Design, Inc. Customer Service Hot Line at
1-313-895-0700.
If you need additional parts,
it is not necessary to contact your dealer, our Customer Service Rep. will forward them
to you immediately.
Aug. 08 Revised- RPI
Hardware List
[1] - M4x12mm Screws
(18 each)
[2] - Nuts
(2 each)
[3] - M6x8mm Allen
Screw (4 each)
[4] - M6x12mm Allen
Screw (2 each)
[9] - Hinge
(4 each)
[10] - Wrench
(1 each)
Pg. 1
Additional Tools needed: Phiillips Screwdriver
[11] - Allen-Wrench
(1 each)
[5] - Knobs - Male
(4 each)
[6] - Washer with small
hole (4 each)
[7] - Washer with large
hole (4 each)
[8] - Threaded Rubber
Feet (4 each)
[A] - Table Top (1 each) [B] - Base foot (2 each) [C] - Foot Rest Cross
Support (1 each)
Parts List
[E] - Tilt Bracket End
(2 each)
[F] - Tilt Bracket (2 each) [G] - Pencil Edge
(1 each)
[D] - H-Frame
Support
(1 each)