Martin Universal Design Manchester Split-top Table - Manual (Page 12)

Once Side Shelf is positioned correctly, secure shelf
using 3 wood 4x30mm screws (Part R) in the holes
indicated in FIG 21. Use a Phillips Screwdriver to
secure.
DO NOT OVER TIGHTEN - This will cause the
screws to be loose.
STEP 16] Attaching Side Shelf
Manchester Split-top Table Assembly Instructions
4444 Lawton Avenue, Detroit, MI 48208 USA • Tel:(313)895-0700/Fax:(313)895-0709
Email: [email protected] • visit us at www.MartinUniversalDesign.com
May 08- RPI Pg. 12
Secure with
screws in the
indicated holes
WARNING:
Your Table needs to be turned back onto its legs. Use 2 people to carefully turn the
table back over onto its legs.
Attach Pencil Ledge (Part W) to the front edge of table
top, using 2 each 4x12mm screws (Part S) as shown
in FIG 22.
STEP 17] Attaching Pencil Ledge
FIG 21
FIG 22
W
Side view of pencil
ledge after properly
installed on table top
Proper Assembled Table should now look like
Photo at Right.
To Tilt Table Top, lift on back edge of table top,
from flat position and lift until desired position.