Martin Universal Design 91-1106 STILLETO CHAIR - Manual (Page 2)

1.
Place base (D) face down and push
castors (E) in firmly. Insert cylinder
(B) through base cap into chair base.
Twist and press firmly.
Slide Foot Ring (I) down over cylinder.
B
D
4.
Take the complete seat assembly and
insert the seat plate over the cylinder
(B) by inserting the cylinder into the hole
on the bottom of the seat plate (A).
5.
Attach backrest (F) to backrest support
bar by snapping backrest cover (H) over
“T” of Support bar. Continue by attach-
ing to backrest using [2] 1” black screws
(L). Tighten securely.
Chair is now ready to be used.
6.
B
2.
J
A
C
Attach support bar with bellows (C) to
seat plate (A) by sliding the bar into the
raised area of the seat plate
(see arrow for location).
Thread Knob (J) into hole in seat plate,
making sure knob threads through seat
plate.
3.
Created by RPI 0606
E
With seat cushion lying plastic side up,
line up holes in seat plate (A) with holes
in seat cushion (G). Attach with [4] 3/4”
black screws (K). Tighten securely.
K
A
G
H
F
L
Once complete, Double check all
screws and bolts to make certain
nothing is loose.
Chair is now ready to be used.
I