Barksdale BPS3000 User Manual
Page 6
Factory setting
Hi
Maximum
peak value
Delete
Lo
Minimum
peak value
Delete
COF
Offset (10 %
of measuring
range)
ddis
0 s
Damping
display
0... 50 s
Fdis
norm.
Function
display
norm. –
rot.
* only models with 2nd switching contact
** only models with analog output
*** setting according to measuring range
Lock
Display
+
5 sec.
Lock
On - Off
Off
Software
lock
8 Maintenance/Cleaning
Maintenance
The pressure switch requires no maintenance.
WARNING
Check the switch for functioning at regular intervals.
If the switch does not work properly, stop operation immediately.
Cleaning
CAUTION
The keys may be damaged by the use of unsuitable cleaning agents.
Do not use any cleaning agents containing solvents or abrasive additives.
9 Decommissioning
DANGER
Only remove the switch when deenergized (electrically and hydraulically/pneumatically).
Disconnection of the switch from pressure and power supply must be carried out by trained or
instructed personnel according to state-of-the-art standards.
WARNING
Be aware of the fact that in case of operation with higher temperatures the casing surface may
become very hot!
11
10
4
5
6