Barksdale UDS7-BX - Manual (Page 2)

Connecting the switch
Mount the unit using the two 11/32 diameter holes provided, see figure for mounting / plumbing
dimensions.
Electrical connection: 3/4“ NPT female. Seal with certified junction box.
Process co nnection: 1/4“ NPT female. Warning always use hex flats provided as bearing points
when connecting / disconnecting.
To access unit for programming & electrical terminal connection, loosen cover locking
set screw and remove the cover electrical terminal connection on the accessible by
removing the internal top plate.
Electrical connections
3. Menu Access (Reference operating and display elements)
1 After switching on with change to the first dialog item.
2 Change dialog item Select the desired dialog item with or (see chap. 4).
3 Activate dialog item
Value input/function
selection Activate the desired dialog item with to change the corresponding value or
the desired function.
4 Change value Select the individual digits with .
Change the numerical value with or and acknowledge with .
If the entered value is within the permissible range, the system changes to the
dialog item after input of the last digit, otherwise the 1st digit will flash again.
5 Change function Change the function with or and acknowledge with .
Activate key lock Simultaneously press + for at least 5 s. The display must not change
during this time. When key lock is activated appears in the display e. g.
*.
Key lock active Values or functions are displayed, but cannot be changed. appears in the
display when an attempt is made to make a change.
Deactivate key lock Simultaneously press + for at least 5 s. The display must not change
during this time. When key lock is deactivated appears in the display
e. g. *.
Return to measuring
mode If no entry is made for 2 minutes, the switch automatically returns to the
measuring mode
without accepting the entries.
Terminate
programming Press for at least 5 s to change to the measuring mode.
Agency Approvals:
CE 0081
ISSeP 09 ATEX 034X
II 2 G D
Ex d IIC T6 Gb
Ex tb IIIC T80°C Db IP65
-
40°C ≤Tamb ≤ +60°C
Barksdale Inc.
CONTROL PRODUCTS
Barksdale Inc.
3211 Fruitland Avenue
Los Angeles, CA 90058-0843
U.S.A.
Phone: (323) 589 - 6181
Fax: (323) 589 - 3463
E-mail: [email protected]
www.barksdale.com
See Barksdale‟s Standard Conditions of Sale • Specifications are subject to modification at any time
Bulletin #272390 A  10/13  Printed in the U.S.A.
2
* Software version no.
7