Assa high security lock - Manual (Page 138)

An ASSA ABLOY Group company 137
ASSA Care & Maintenance
TWIN V-10, TWIN EXCLUSIVE, TWIN PRO, TWIN MAXIMUM, CLIQ
Servicing ASSA Cam Locks
Key Retained
Plug
Shell
Stop
Washer
Cover Slide
Plug
Pins
Shell
Stop
Washer
Cover Slide
Non-Key Retained
ASSA cam locks are serviced with standard Twin bottom and master pins. The tops pins, or drives and springs
used in ASSA cam locks are the hollowed top pins used in the ASSA Interchangeable Core product T-2 through
T-9. The top pin used in each chamber is equal to the total operating stack. A #7 bottom pin uses a T-7 top pin.
For master keying a #5 bottom pin – a #3 master pin equals a total operating stack of 2. The T-2 top pin is used.
Due to stack height restrictions the #1 depth of cut can not be used in ASSA cam locks.
Top Pin #2 – 809328
Top Pin #3 – 809329
Top Pin #4 – 809330
Top Pin #5 – 809331
Top Pin #6 – 809332
Top Pin #7 – 809333
Top Pin #8 – 809334
Top Pin #9 – 809335
Chamber spring – 809335
T2
.047"
1.2mm
809328
T3
.071"
1.8mm
809329
T4
.094"
2.4mm
809330
T5
.118"
3.0mm
809331
T6
.142"
3.6mm
809332
T7
.165"
4.2mm
809333
T8
.189"
4.8mm
809334
T9
.213"
5.4mm
809335
0.875"
0.718"
1.496"
1.082"
0.118"
0.866" 0.984"
Max 0.905"
0.875"
For metal installation use 7/8" double D punch.