Analog Devices EZ-EXTENDER 82-000218-01 - Manual (Page 11)

Bluetooth EZ-Extender Manual xi
Preface
All of the power necessary to operate the extender is derived from the mat-
ing EZ-KIT Lite/EZ-Board. Before using any of the interfaces, follow the
setup procedure in
“Bluetooth EZ-Extender Setup” on page 1-4 .
Purpose of This Manual
The Bluetooth EZ-Extender Manual describes operation and configuration
of the extender board components. A schematic and a bill of materials are
provided for reference.
Intended Audience
The primary audience for this manual is a programmer who is familiar
with Analog Devices processors. This manual assumes that the audience
has a working knowledge of the appropriate processor architecture and
instruction set. Programmers who are unfamiliar with Analog Devices
processors can use this manual, but should supplement it with other texts
(such as the Processor Hardware Reference and Processor Instruction Set Ref-
erence) that describe your target architecture.
Manual Contents
The manual consists of:
• Chapter 1, “Using Bluetooth EZ-Extender” on page 1-1
Provides basic board information.
• Chapter 2, “Bluetooth EZ-Extender Hardware Reference” on
page 2-1
Provides information about the hardware aspects of the board.