Analog Devices EZ-EXTENDER 82-000218-01 - Manual (Page 32)

Connectors
2-10 Bluetooth EZ-Extender Manual
Expansion Interface II Connector (J5)
The board-to-board connector ( J5 ) provides signals for the PPI, TWI
interfaces and GPIO signals of the mating EZ-Board. The connector is
located on the bottom side of the board. For availability and pricing of the
connectors, contact Samtec.
Refer to “Expansion Interface” on page 1-6 for more information.
Expansion Interface II Connector (P2)
The board-to-board connector ( P2 ) provides signals for the SPI, TWI,
SPORT interfaces and GPIO signals of the mating EZ-Board. The con-
nector is located on the top side of the board. For availability and pricing
of the connectors, contact Samtec.
Refer to “Expansion Interface” on page 1-6 for more information.
Part Description Manufacturer Part Number
70-position 0.1’’, SMT socket SAMTEC SSW-135-22-F-D-VS
Mating Connector
70-position 0.1’’, SMT header SAMTEC TSSH-135-01-L-DV-A
Part Description Manufacturer Part Number
50-position 0.1’’, SMT socket SAMTEC TSSH-125-01-L-DV-A
Mating Connector
50-position 0.1’’, SMT header SAMTEC SSW-125-22-F-D-VS