Server board jumpers – Acer Altos R700 Series User Manual
Page 107
Advertising
97
Server Board Jumpers
Label
Jumper Name
What it does at system reset
A
RJ-45 Serial Port
Config
Configures either a DSR or a DCD signal to
the connector. See “RJ-45 Serial Port” on
page 15.
B
CMOS CLR
If these pins are jumpered, the CMOS
settings are cleared. These pins should not
be jumpered for normal operation.
C
PSWD CLR
If these pins are jumpered, the password is
cleared. These pins should not be
jumpered for normal operation.
BS811.f/cppl!!Qbhf!:8!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN
Advertising