Acer Altos R700 Series User Manual
Page 83
73
5
In the System Phone Number box, enter the number for the phone
line connected to the modem on the EMP.
6
From the Access Mode list, choose the remote access mode:
•
Always Active: the EMP is available at any time.
•
Preboot: the EMP is available only when the server is
powered down or is in the running POST during startup.
•
Disabled: remote systems are not allowed to initiate
connections.
7
From the Restricted Mode list, choose either:
•
Enabled: a remote system can initiate a connection, but
cannot perform control operations such as power down, reset,
or front panel NMI.
•
Disabled: the remote system has full control of the server.
8
From the Connection Mode list, choose either:
•
Direct Connect: the serial 2 port on the server is connected
by a serial cable to the remote system.
•
Modem Connect: the serial 2 port on the server is connected
to a modem.
9
Click Save to save the changes.
10 Click Close to return to the PEM window.
BS811.f/cppl!!Qbhf!84!!Uvftebz-!Opwfncfs!37-!3113!!21;19!BN