Asoka Pluglink PL9950-BBR - Manual (Page 26)

Asoka® User’s Guide
PlugLink 9950 Cable/ DSL Router PL9950-BBR
Page 26 of 43
Figure 10-7: Port Mapping Settings Page
Setting Port Triggering
The Port Triggering feature allows you to specify a range of ports for a specific local machine to
route the packets. The 9950 Cable/ DSL Router allows the user to configure the needed port
trigger to suit such applications.
To configure port mapping, click on Port Mapping under NAT in the Sub Menu.
1. Enter the trigger port
2. Select connection type: TCP or UDP
3. Enter
incoming port
4. Check the box next to Enabled
5. Click Apply