Asoka Pluglink PL9950-BBR - Manual (Page 34)

Asoka® User’s Guide
PlugLink 9950 Cable/ DSL Router PL9950-BBR
Page 34 of 43
Figure 11-5: System Reboot Confirmation Popup
5. The Reset Device Successfully screen will appear as shown in figure 11-6. Rebooting the
PL9950-BBR Router can take up to 60 seconds. It is important not to turn off the power or
unplug the PL9950-BBR Router during the reboot.
Figure 11-6: System Reboot Status Screen
6. When the PL9950-BBR reboots, the home page should appear automatically. If not, type in
the PL9950-BBR Router’s address (default = 192.168.1.1) into the address or navigation bar of
your web browser.
Restoring Factory Default Settings
Using this option will restore all of the settings in the PL9950-BBR Router to the factory default
settings. It is recommended that you back up your settings prior to restoring to factory default
settings. To restore factory default settings, follow these instructions:
1. Click
on System in the top menu.
2. Click on Restore Defaults in the right menu.
3. Click the Factory Default button.