Apogee Digital X-HD - Manual (Page 23)

APOGEE ELECTRONICS
13
X-HD card – User’s Guide
AD-16X & DA-16X
Interface Connections Chart: Advanced Option Routing
(per Digidesign Core, Process or Accel card)
When Advanced Option routing is enabled on AD16X or DA16Xs, the additional digital I/O accessible to the X-HD
card causes the interfaces to be detected differently in the Pro Tools’ Hardware Setup page. For example, an AD
and DA16X set to Standard routing is detected as 1 Digidesign 192, while the same interfaces in Advanced Option
routing are detected as 2 192s; the AD16X operates as a 16 analog in, 16 digital out 192 while the DA16X oper-
ates as a 16 digital in, 16 analog out 192.
The following chart entries display all combinations of AD16Xs,DA16Xs (when set to Advanced Option routing)
and other HD-compatible interfaces that may be connected to one HD Core Process or Accel PCI card.
APPEARS AS...
in Hardware Setup
INPUT
OUTPUT
A1-16 B1-16 From Computer
INTERFACE SET CHANNELS IN USE
INPUT
OUTPUT
A1-16 B1-16
From Computer
AD-16X: Analog In
AD-16X: Digital Out
DA-16X: Digital In
DA-16X: Analog Out
From Computer
E
P
E
P
INPUT
OUTPUT
A1-16 B1-16
AD-16X: Analog In AD-16X: Analog In
AD-16X: Digital Out AD-16X: Digital Out
From Computer
E
P
E
P
INPUT
OUTPUT
A1-16 B1-16
DA-16X: Digital In DA-16X: Digital In
DA-16X: Analog Out DA-16X: Analog Out
From Computer
E
P
E
P
INPUT
OUTPUT
A1-16 B1-16
AD-16X: Analog In DA-16X: Digital In
DA-16X: Analog Out AD-16X: Digital Out
E
P
E
P