Rugged Ridge Cold Air Intake Kit, 2.4L, 03-06 Jeep Wrangler (TJ) - Manual

Page 1 of 2
17750.03
2003-2006 2.4L Wrangler
1.Original Air Box and Intake Tube will
need to be removed.
2. Unclamp Air Filter Cover
3. Remove Crankcase Breather Tube
4. Remove Clamp on Throttle Body
5. Remove upper section of filter box and set aside
6. Remove factory air filter
7. Remove 10 mm Nut holding the air box,
and remove air box.
8. Remove upper passenger side radiator
mount bolt.
9. Unplug electric fan connector.
Contents:
1. Intake Tube (1)
2. Heat Shield (1)
3. Weather Stripping
4. Air Filter (1)
5. Throttle Body Coupling (1)
6. Large Hose Clamps (3)
7. Breather Hose (1)
8. Small Hose Clamps (2)
9. Rubber Isolater Mount (1)
10. Flat washers (2)
11. Flanged Nuts (2)