Rugged Ridge Cold Air Intake Kit, 2.4L, 03-06 Jeep Wrangler (TJ) - Manual (Page 2)

Page 2 of 2
17750.03
2003-2006 2.4L Wrangler
10. Mount Heat Shield using the bolt removed from
the upper right hand side of the radiator. Use the
rubber isolater bolt to secure the bottom of the
heat shield to the body.
11. Mount the tube to the top of the rubber mount.
12. Install the rubber coupler to the throttle body
and intake two with two large clamps.
13. Install the small hose to the intake tube and to
the motor with two small clamps.
14. Secure the heat shelid to the rob brace using
the zip tie.
15. Install filter using large hose clamp.
16. Start vehicle and inspect for leaks.
For Technical Assistance Contact:
OMIX-ADA Tech Support
Phone: 1-800-449-6649
Email: [email protected]
Web: www.Omix-Ada.com