Avaya 2600 - Manual (Page 7)

TMA; Reviewed:
SPOC 7/21/2008 Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
7 of 21
ProCurve-ACM
1. Log into the ProCurve 5406zl Switch using the appropriate Login ID and Password.
Login:
Password:
ProCurve Switch 5406zl#
2. Enable the following features on the ProCurve 5406zl Switch.
• Enable routing.
• Enable spanning tree and make the ProCurve 5406zl Switch the root bridge.
• Enable QoS for Differentiated Services.
• Create trunks trk1 and trk2 using link aggregation protocol. Trunk trk1 goes to the
ProCurve 2610-24-PWR Switch and trunk trk2 goes to the ProCurve 3500yl-24G-PWR
Switch.
• Set priority for the IP address of Avaya Communication Manager.
• Set priority for the Avaya SIP Enablement Services IP address.
• Save the running configuration to the startup configuration.
ProCurve Switch 5406zl# configure
ProCurve Switch 5406zl(config)# ip routing
ProCurve Switch 5406zl(config)#
spanning-tree
ProCurve Switch 5406zl(config)# spanning-tree priority 1
ProCurve Switch 5406zl(config)# qos dscp-map 101110 priority 6
ProCurve Switch 5406zl(config)# trunk a1-a2 trk1 lacp
ProCurve Switch 5406zl(config)# trunk a19-a20 trk2 lacp
ProCurve Switch 5406zl(config)# qos device-priority 10.1.1.1 dscp 101110
ProCurve Switch 5406zl(config)# qos device-priority 10.1.1.10 dscp 101110
ProCurve Switch 5406zl(config)# write memory