Apollo SA-02-015 - Manual (Page 12)

User Manual
DI170S01-A01
DI170S01-A01
Product No. : SA-02-015 Rev 1
May 23, 2005
Page 12 of 16
3. After selecting a sub menu, use the Left or Right buttons to move through the sub menu. To select a setting
icon, press the Menu button after your selection. The selected icons are highlighted and explained via
onscreen text in the lower right of the OSD screen.
4. There are two types of icons: Some have a single function and must be confirmed with the Menu button, the
other option are setting bars. Once a setting bar appears, it can be increased or decreased via the Left and
Right buttons. The setting bar moves and the numeric value indicator changes to reflect your adjustments.
NOTE: The numeric value indicator is provided as a point of reference only and has nothing to do with a real
measurement.
5. There are many ways to close the OSD menu:
- Waiting some seconds (timeout). This time can be adjusted as needed in one of the menus.
- In the main and sub menu, press the Exit button. This highlights the “Exit” icon in the menu. Then press the
Menu button to leave the OSD menu.
- After an Autoadjust and confirmation the OSD menu closes automatically.
- After adjusting a setting, press the Menu button to go back to the sub menu, then press the Exit button or
use the Right button to select the “Exit” icon. Confirm via the Menu button and the OSD turns off.
7.2.2 OSD Structure
Main Menu
Brightness
Contrast
Color
Brightness
Black Level
Contrast
Auto Color
sRGB
Color Temperature
CMY
Flesh Tone
Hue
Saturation
User
Image
Tools
Autoconfiguration
Width
Phase
Horizontal Position
Vertical Position
OSD
Factory Reset
Sharpness
OSD Timeout
OSD Hor. Position
OSD Ver. Position
OSD Size
4200K
5000K
6500K
7500K
9300K
Autoconfiguration Fast
Normal