Australian Monitor HA6 - Manual (Page 7)

S P E C I F I C AT I O N S
PAG E 7
FREqUENCY RESPONSE 20Hz - 20kHz (+0,-3dB)
TOTAL HARMONIC DISTORTION < 0.1% @ 1kHz
SIGNAL TO NOISE RATIO > 90dB (all pots at centre position)
CROSSTALK >70dB
SENSITIvITY (TRIM IN CENTRE 0dB) Line Sens 0.775V, 0dBu Imp >100k
RCA 200mV, -12dBu Imp 30kohm
TRS 0.775V, 0dBu Imp 10k
MAx LEvEL IN XLR mic -9dBu line >30dBu
RCA >30dBu
TRS >30dBu
MAx LEvEL OUT +21dBu
OUTPUTS
NOMINAL LEvEL 0dBu into 1kohm
IMP 100ohm
POwER INPUT AC: 230V/50Hz or 115V/60Hz, 3 pin IEC320-C14 connector
POwER CONSUMPTION (MAx) 7.5VA
FUSES
MAINS (115v) 125mA
MAINS (230v) 63mA
DIMENSIONS H x w x D 44mm x 482mm x 182mm (1.75“x19”x7.2”)
SHIPPING DIMENSIONS 90mm x 505mm x 270mm (3.5“x19.9”x10.6”)
wEIGHT Net 2.8kg (6.2lb)
Shipping 3.8kg (8.4lb)
A M I S H A 6 I N S TA L L AT I O N & O P E R AT I O N M A N UA L