Australian Monitor MX82 - Manual (Page 3)

I N T R O D U C T I O N A N D C O N T E N T S
PAG E 3 M X 8 2 I N S TA L L AT I O N & O P E R AT I O N M A N UA L
The MX82 is an 8 channel stereo audio mixer that operates from 110/230-240
VAC @ 50/60 Hz. The MX82 offers high quality audio performance & a wide
array of features in a standard 1 RU size. For table mounting, rubber feet are
supplied but these can be removed if rack mounting is intended. There are four
mic/line inputs consisting of balanced XLR inputs switchable between mic &
line level. The first 4 channels also feature a line level direct output which can
be used to feed additional amplifiers, mixers or recording devices. An internal
jumper allows the first 4 inputs to be routed to the direct output and the master
outputs or just the direct output, either pre or post fader. Inputs 5-8 are four
dedicated stereo RCA line level inputs.
Each input has front panel trim control, status LED and bass & treble controls.
Priority muting is available as an optional addition as is remote VCA master
control and tone generation.
The MX82 also features 4 segment LED output metering & the ability to inter-
nally switch input 1 to be either pre or post master. With both Headphone out
& Record out also available the MX82 is extremely versatile. The MX82 has
taken the AMIS heritage of contractor friendly installation product & has added
the audio fidelity needed in today’s AV contracting market.
INTRODUCTION 3
FRONT PANEL 4
REAR PANEL 5
INTERNAL ADJUSTMENTS 6
INSTALLATION & TROUBLESHOOTING 7
BASIC SETUP AND OPERATION 8
DIMENSIONS 9
BLOCK DIAGRAM 10
SPECIFICATIONS 11
AUS, EUR, USA
Copyright 9th Feb 2006
Rev A 13/02/07
This symbol is intended to alert the user to the presence
of uninsulated “dangerous voltage” within the products
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence
of important operational and maintenance (servicing)
instructions in the literature accompanying the appliance.
To prevent electric shock do not use this (polarised) plug
with an extension cord, receptacle or other outlet unless
the blades can be fully inserted to prevent blade exposure.
To prevent electric shock, match wide blade of plug to wide
slot, fully insert. Caution:
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONAL.
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN