Australian Monitor BGM2TCD - Manual (Page 5)

F R O N T PA N E L - A M / F M T U N E R
POWER
Turns only this AM/FM tuner on or off.
BAND
Changes between AM and FM bands.
SLEEP
This button allows you to set a
countdown timer to switch the tuner
module off. It is set in increments of
10mins from 90mins down to 10mins.
Pressing this button while in sleep
countdown mode turns off the sleep
function.
TUNE (UP/DOWN)
Changes the tuner frequency.
MEMORY (UP/DOWN)
Changes the preset number.
1-5; +5
These buttons allow the immediate
selection of a preset.
Use +5 to select 6-10.
MEMORY
This button allows the memory setting
to be programmed. To program a
memory setting:
1. Tune to the frequency you want
2. Press MEMORY
(MEMO flashes on LCD display),
3. Press a number from 1-5
(or +5 and a number for 6-10)
4. Press MEMORY again.
This process must be completed within
4 secs or you will need to start again.
AM/FM Tuner
PAG E 5 B G M 2 P R O G R A M S O U R C E S E R I E S I N S TA L L AT I O N & O P E R AT I O N M A N UA L
1
1 2 3
2
3
4
4
5
5
6
7
7 6