Comfort-Aire RG-51G - Manual (Page 6)

Owner’s Manual Room Air Conditioner with R-410A Heat Controller, Inc.
5
NORMAL SOUNDS
AIR CONDITIONER FEATURES
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be controlled
by the unit control alone or with the remote.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
ADJUSTS
TEMPERATURE
OR TIME
ADJUSTS
TEMPERATURE
OR TIME
DISPLAYS
TEMPERATURE
OR TIME ACTIVATES
TIMER
CHECK FILTER
RESET BUTTON
SETS MODE
ENERGY
SAVER MODE
SLEEP MODE
CLEAN AIR MODE
(on some models)
SET FAN SPEED
TURNS UNIT
ON OR OFF
UNIT CONTROL
Temp Temp
Timer Timer
On
Off
Sleep Check
Filter
Timer
Auto
Cool
Dry
Fan
Low
Auto
Med
High
Clean
Air
Fan Mode
Follow
Me
Energy
Saver On/Off
5
FOLLOW ME INDICATOR
(on some models)
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
Swishing
swishing
NORMAL SOUNDS
Sound of Rushing Air
At the front of the unit, you may
hear the sound of rushing air
being moved by the fan
High Pitched Chatter
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Gurgle/Hiss
Gurgling or hissing noise may
be heard due to refrigerant
passing through evaporator
during normal operation.
Pinging or Switching
Droplets of water hitting condenser
during normal operation may cause
pinging or switching sounds.
Vibration
Unit may vibrate and make noise
because of poor wall or window
construction or incorrect installation.
5
POINTS FOR USING AIR CONDITIONER
NOTE:
To begin operating the air conditioner, follow these steps:
If the air conditioner is turned off, wait 3 minutes before restarting. This allows pressure inside the
compressor and equalize. Failure to follow these instructions may be harmful to your unit.
1. Set the thermostat to the highest number (coldest or cooler setting).
2. Set the selector control to the highest COOL setting.
3. Adjust the louver for comfortable air flow (see Air Directional Louvers).
4. Once the room has cooled, adjust the thermostat to the setting you find most comfortable.
5. Make sure that the air flow inside and outside are not obstructed by anything.
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
If the unit is operated beyond the conditions specified above, it may cause a failure of the unit.
6. This air conditioner is designed to be operated under conditions as follows:
Cooling Operation
Ambient temp.: 18-43 C
Operation temp.:17 -30 C
The relative humidity of room should be less than 80%.
If the unit is used in a condition with a relative humidity over
80%, there will be condensed water on the surface of the unit.
Note:
(64 F~109 F)
(62 F~86 F)
64°F ~ 109°F (18-43°C)
62°F ~ 86°F (17-30°C)
to
Before using your air conditioner, please read
this manual carefully and keep it for future reference.
WINDOW/WALL TYPE
ROOM AIR CONDITIONER -
3. Adjust the louver for desired air flow direction (see Air Directional Louvers).
4. Once the room has cooled, adjust the thermostat to the setting you find most comfortable.
5. Make sure that the air flow inside and outside the unit is not obstructed by anything.