Silverline Air Tools & Compressor Accessories Kit 5pce - Manual (Page 5)

4
GB
As part of our on-going product development, specifications of Silverline products
may alter without notice.
Carefully read and understand this manual and any label before use. Even when
used as prescribed it is not possible to eliminate all residual risk factors. Use with
caution.
Carefully read and understand this manual and any label attached to the tool
before use. Keep these instructions with the product for future reference. Ensure
all persons who use this product are fully acquainted with this manual.
If you are at all unsure of the correct and safe manner in which to use this tool, do
not attempt to use it.
General Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury
Save all warnings and instructions for future reference.
Work area safety
• Keep work area clean and well lit. Cluttered or dark areas invite accidents
• Do not operate tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust
• Keep children and bystanders away while operating a powered tool.
Distractions can cause you to lose control
Personal safety
• Stay alert, watch what you are doing and use common sense when
operating a powered tool. Do not use a powered tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating a powered tool may result in serious personal injury
• Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries
• Prevent unintentional starting. Ensure the switch is in the off-position when
not operating the tool and make use of other safety features which prevent
unintentional starting
• Remove any adjusting key or wrench before turning the powered tool
on. A wrench or a key left attached to a rotating part of the tool may result in
personal injury
• Do not overreach. Keep proper footing and balance at all times. This
enables better control of the tool in unexpected situations
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts
• If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary limit the length of time exposed to vibration. Use the
figures provided in the specification relating to vibration if provided to calculate the
duration and frequency of operating the tool. The 2002/44/EC directive relating to
vibration in the workplace may provide useful information even for domestic use
of tools. In the first instance of feeling uncomfortable due to vibration STOP using
the tool immediately
WARNING: Always wear ear protection where the sound level exceeds 80dB and
limit the time of exposure if necessary. If sound levels are uncomfortable even
with ear protection stop using the tool immediately and check the ear protection
is correctly fitted and provides the right level of sound attenuation for the level of
sound produced by your tool
Tool use and care
• Maintain tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the tool’s
operation. If damaged, have the tool repaired before use. Many accidents
are caused by poorly maintained tools
• Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control
• Use the tool’s accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work
to be performed. Use of the tool for operations different from those intended
could result in a hazardous situatio
Service
• Have your tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the tool is maintained
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Conforms to relevant legislation and safety standards
Specification
*CFM figures based on SCFM figures and approximate figures only
Silverline Tools reserves the right to alter product specifications without notice.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with
caution. If you are at all unsure of the correct and safe manner in which to use this
product, do not attempt to use it.
Spray Gun
Degreasing
Gun
Tyre
Inflator
Blow
Gun
Hose
Working
Pressure
55psi (3.5
Bar)
55psi (3.5
Bar)
0-60psi
(0-4
Bar)
30-90psi
(2-6
Bar)
120psi (8
Bar) Max
Pressure
Air
Consumption*
3-6CFM 3-6CFM 6-9CFM 3-6CFM N/A
Fluid Capacity 750ml 900ml N/A N/A N/A
Fluid Delivery
110-200ml/
min
- N/A N/A N/A
Nozzle 1.5mm 4.5mm N/A 2.0mm N/A
633548_Z1MANPRO1.indd 4 11/12/2012 10:19